Our Products
Commercial Gate Automation > Automatic Traffic Barriers > Barriers Up To 6m > SGDBARRIER AUTOMATIC TRAFFIC BARRIER 6m BOOM ARM
01140

SGDBARRIER AUTOMATIC TRAFFIC BARRIER 6m BOOM ARM

SGDBARRIER AUTOMATIC TRAFFIC BARRIER 6m BOOM ARM
larger imageMove mouse over the image to magnify
Enquire

SGDBARRIER Automatic Barrier 6m Boom Arm

230Vac powered, 24Vdc Traffic Barrier, mild steel painted cabinet or stainless steel complete with control panel & battery charger card. Maximum 6 metre opening. Approximate opening time 6 sec/90°.
 
  • Residential / commercial use
  • For boom arms up to 6 metres
  • Low voltage DC motor
  • Optical encoder technology
  • Opening time 6 seconds
  • Intensive use
  • Ideal for entrances and car parks
  • Works even during power outage thanks to the backup battery
  • Obstacle detection and crush prevention

Flexible Arm Length
  • Traffic Barrier with extendable 4-6 metre Barrier Arm.
 
Easy Installation
  • Fixed in position by bolting a holding plate down with 4 x M10 Masonry Anchor Bolts.
  • Once in place it is simply a matter of connecting the 230V ac power and the control devices.
 
Uses an Elsema MSC Control Board to facilitate a wide range of functions
  • Auto close – after a designated time delay.
  • Security close – in conjunction with a Photocell or Loop Detector, activates the closing cycle when it detects the passage of a vehicle. An adjustable timer allows the vehicle to clear the gateway before the Barrier Arm lowers.
  • Obstruction sensing – During the lowering cycle, the Barrier Arm will automatically return to an open position if an obstruction occurs and/or is detected by photocell or vehicle loop detector.
 
Drive System
  • A powerful 80w 24V dc Geared Motor drives the system.
  • The Barrier Arm is driven directly through linkages and gearbox.
 
Control devices
Compatible with a wide range of Control Devices: - card access control systems, radio transmitters, vehicle induction loops, etc.

A typical SGDBARRIER Automatic Barrier 6m Boom Arm system includes the following:

SGDARM SGDARM, 4 to 6 metre painted aluminium Telescopic Boom Arm
SGDSUPPORT Fork Support for the SGDARM Telescopic Boom Arm
200BATT 12V 7AHr Backup Battery for 12V Control Panel
ULD913/ULD923 SensAble Sensors 12/24V, Single or Dual Channel vehicle inductive Loop Detector with base.
ULD911/ULD921 SensAble Sensors 230V, Single or Dual Channel vehicle inductive Loop Detector with base. Directional Control logic capable.
900OPTIC 2 x Sets of surface-mounted 12/24V ac/dc Infrared Safety Photocells, beam alignment adjustable up to 15º, 20 m range.
> Download PDF Acrobat Reader Logo-487
Data Sheet SGD-Barrier.pdf
Manual Release