TAU 350T-ONE8BR 24V SLIDING GATE DRIVE

TAU 350T-ONE8BR 24V Sliding Gate Drive

TAU S.r.l. 24Vdc Gearmotor Sliding Gate Drive (230Vac powered) with encoder, built-in control panel, 2 channel 433.92 Mhz built-in radio receiver on control board for up to 30 codes maximum, & battery charger card. 100% Duty Cycle. Speed - 383mm/sec on opening. Maximum  gate weight 800kgs.
 

• Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology
• residential / apartment building / light commercial use
• for gates up to 800 kg
• low voltage DC gate drive
• optical encoder technology (no limit switches required)
• electronic control unit with built-in two-channel radio receiver
• built-in battery charger
• obstacle detection and crush prevention
• works even during power outage thanks to the backup battery
• fast operating speed
• intensive use
• soft start and soft stop

Technical features	350T-ONE8BR
Power supply (to control unit)	230 V AC (50 - 60 Hz)
Motor power supply	24 V DC
Motor absorption (no load)	1.05 A
Power rating	300 W
Max. operating speed	383mm/sec
Duty cycle	100 %
Max. thrust	980 N
Operating temperature	-20° C - +55° C
Degree of protection	IP 54
Max. gate leaf weight	800 kg
Pinion module	Module 4
Electronic control unit	K126MA

PLEASE NOTE: Safety First

The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 

> Download PDF

Data Sheet	350T-ONE8BR.pdf
Manual Release