24Vdc Industrial/Commercial Swing Gate Drive with 316 stainless-steel cover, separate Elsema MCV2 control unit mounted in a IP65, 316 stainless-steel enclosure 400x400x200. Two industrial grade alloy gear boxes with a unique torque control and easy disconnect facility should there be a need.
Smooth, adjustable ramp up, ramp down, opening and closing speed
Built-in battery charger for battery back-up
Built-in easy set limit switches
Hot-dipped galvanised chassis
Heavy duty tubular arms.
Motor power - 24V 120w
Input power - 230Vac 10A
Duty cycle - 100% when connected to 230Vac power source.
Output speed - 8-10 sec/90°
Gate weight - up to 300kg
Gate to 4m each leaf x 1.8m high approx. open bar
Available as Dual Industrial/Commercial Swing Gate Drives
Technical features
SGD4-24
Power supply (to control unit)
230V ac 10A single phase input
Motor power supply
24V 120W dc drive motor
Max. operating speed
8-10 sec/90°
Duty cycle
100 %
Degree of protection
IP 65 stainless-steel enclosure
Max. gate leaf (open bar style)
4m each leaf x 1.8m high
Max. gate leaf weight
300kg
An installed system can include the following:
BS-400T
Barrier-Curtain Sensor, 4 Infrared Through Beam Photocell, 10-30V dc relay output. For gate openings up to 7 m.
900OPTIC
2 x Sets of surface-mounted 12/24V ac/dc Infrared Safety Photocells, beam alignment adjustable up to 15º, 20 m range.
ULD913/ULD923
SensAble Sensors 12/24V, Single or Dual Channel vehicle inductive Loop Detector with base.
ULD911/ULD921
SensAble Sensors 230V, Single or Dual Channel vehicle inductive Loop Detector with base. Directional Control logic capable.
PLEASE NOTE: Safety First
All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.
The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
MAINTENANCE: To keep your Automated Gate running smoothly READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.
TAU S.r.l. Photocell Double Mounting Post, painted aluminium, 98 cm high with counter plate for 900OPTIC Photocell. Removable cover for easy installation and photocell adjustment
SDG4-24 24V Articulated Arm Swing Gate Drive
24Vdc Industrial/Commercial Swing Gate Drive with 316 stainless-steel cover, separate Elsema MCV2 control unit mounted in a IP65, 316 stainless-steel enclosure 400x400x200. Two industrial grade alloy gear boxes with a unique torque control and easy disconnect facility should there be a need.
An installed system can include the following:
PLEASE NOTE: Safety First
All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.
The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.
Downloads
Manual Release