Limited spare parts to support the installed ET500-COMPLEX Sliding Gate Drives
Technical features
ET500-COMPLEX
Power supply (to control unit)
Alternate source of supply is a solar charger
220V, +/-10%, 50Hz
Maximum absorbed current @ 220V AC supply
3A
Motor voltage
12V DC
Maximum starting thrust
< 30kgF set
Maximum rated running thrust
22kgF set
Gate Speed:
When measured with mains of 230V AC and battery fully charged and gate running load of 5kgF maximum.
Lower load = higher speed.
Higher load = lower speed.
18m/min
Duty cycle at rated running thrust
100% on PSU 20% battery backup @running thrust less than 10kgF
TAU S.r.l. 24V Sliding Gate Drive (230Vac powered) with optical encoder, K126MA electronic control unit with built-in 3 channel 433.92 MHz radio receiver and battery charger. Opening speed- up to 400 mm/sec. Max. Gate weight- 800kgs. 100% duty cycle
Limited spare parts to support the installed ET500-COMPLEX Sliding Gate Drives
Alternate source of supply is a solar charger
When measured with mains of 230V AC and battery fully charged and gate running load of 5kgF maximum.
Lower load = higher speed.
Higher load = lower speed.
> Download PDF