TAU 650ZIP 230V ARTICULATED ARM SWING GATE DRIVE

TAU 650ZIP 230V Articulated Arm Swing Gate Drive

TAU S.r.l. 230Vac Articulated Arm Swing Gate Drive with limit switches, and anchoring plate. For open bar style gate leaf up to 3.5 metres. Approximate opening time 13 sec/90°.
 

• Residential / light commercial use
• 230V Gate Drive
• Duty cycle – 50%
• Articulated Arm Gate Drive
• High torque and power
• Max. torque – 334 Nm
• Manual release with key lock
• Ideal for big posts

Controlled by the D750M Control Unit with the following features
 

• Built-in 2 channel 433.92 Mhz dip-switch/rolling-code radio receiver
• Slow-down and soft stop
• Complete with enclosure

 

Technical features	650ZIP
Power supply	230 V AC (50 - 60 Hz)
Motor power supply	230 V AC
Absorption	1 A
Absorbed power	190 W
Opening time	90° 13 sec.
Duty cycle	50 %
Max. torque	334 Nm
Operating temperature	-20° C ÷ +55° C
Motor thermal protection	150° C
Degree of protection	IP 44

 

PLEASE NOTE: Safety First

All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.

The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 

> Download PDF

Data Sheet	650ZIP Series.pdf
Manual Release	ZIP End-User Manual.pdf