Our Products

Refer a friend

Know a friend, relative, or co-worker who may be interested in this product? Take this opportunity to let them know.
Friend's Email
Your Email
Your Name
The Message.
Hi, You're receiving this email because {name} thinks the TAU 350T-ONE6B/LS 18V SLIDING GATE DRIVE would interest you.

TAU 350T-ONE6B/LS 18V Sliding Gate Drive

TAU S.r.l. 18Vdc Gearmotor Sliding Gate Drive (230Vac powered) with optical encoder, built-in 500K128MA control board, with battery charger.

Suited to Ground Track gates running near level up to 600 kgs
Suited to Cantilever gates running freely up to 420 kgs
 

  • Intensive use - 100% duty cycle when connected to 230Vac power source
  • Operating speed - 233 mm/sec
  • Low voltage DC Gate Drive
  • Optical encoder technology
  • Electro-mechanical Limit Switches
  • Control board protected within a plastic enclosure
  • Practical manual release with a personal key

Controlled by the K128MA Control Board with the following features:-
 

  • Built-in 3 channel 433.92 MHz rolling-code radio receiver
  • With battery charger for power outage back-up battery operation
  • Electronic obstacle detection and crush prevention. EN 12445/12453 standards
  • Soft start and soft stop
  • Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology

Made in Italy Logo

Technical features 350T-ONE6B/LS
Power supply (to control unit) 230 V AC (50 - 60 Hz)
Motor power supply 18 V DC
Motor Absorption 1.05 A
Absorbed power 250 W
Max. operating speed 233mm/sec
Duty cycle 100 %
Max. thrust 980 N
Operating temperature -20° C - +55° C
Degree of protection IP 54
Tracked Max. gate leaf weight 600 kg
Cantilever Max. gate leaf weight 420 kg
Pinion module Module 4
Electronic Control Unit K128MA

EN12445 Compliant 50

PLEASE NOTE: Safety First

The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

> Downloads
T-ONE6B/LS Data Sheet 350T-ONE6B/LS.pdf
T-ONE Manual Release T-ONE End-User Manual.pdf
T-ONE Series  Manual Release Video T-ONE Series Manual Release Video
For more information, please click Here Regards,
Bracketed text e.g {name} indicates details that will be completed by the system when you click the submit button.

In order to assist us in reducing spam, please type the characters you see: