Our Products
500MASTER20QM

TAU 500MASTER20QM 230V SLIDING GATE DRIVE

TAU 500MASTER20QM 230V SLIDING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

TAU 500MASTER20QM 230V Sliding Gate Drive

TAU S.r.l. 230Vac Gearmotor Sliding Gate Drive with optical encoder, built-in 500D705M control board, with magnetic limit switches.

Suited to Ground Track gates running near level up to 2000 kgs and free rolling Cantilever gates up to 1700 kgs.

 

  • Duty cycle - 40% (up to 8 times per hour)
  • Opening speed - 175 mm/sec
  • Magnetic limit switches
  • Control board protected within a plastic enclosure
  • Irreversible gate drive
  • Practical manual release with a personal key

Controlled by the D705M Control Board with the following features
 

  • Built-in 2 channel 433.92 Mhz rolling-code radio receiver
  • Optical encoder technology for obstacle detection
  • Electronic brake

Made in Italy Logo

Technical features 500MASTER20QM
Power supply 230 V AC (50 - 60 Hz)
Motor power supply 230 V AC
Motor Absorption 3.4 A (no load)
Absorbed power 550 W
Speed maneuver 175mm/sec
Duty cycle 40 %
Max. thrust 1890 N
Operating temperature -20° C ÷ +55° C
Motor thermal protection 160° C
Degree of protection IP 54
Max. gate leaf weight 2000 kg
Pinion module Module 4
 

PLEASE NOTE: Safety First

The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Downloads
MASTER20QM Data Sheet 500MASTER20QM.pdf
MASTER Series Manual Release Instructions MASTER End-User Manual.pdf
MASTER Series Manual Release Video MASTER Series Manual Release Video
Work Safe WKS-9 Safety Alert  Automated Gates WKS-9 Safety Alert.pdf

You might also be interested in ...

COMBI ARIALDO 405_Series U WHEEL / with axle bolt

COMBI ARIALDO 405_Series U WHEEL / with axle bolt

COMBI ARIALDO 405_Series Sliding Gate U Wheel with axle bolt, 2 bearings.
TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU S.r.l. Set of infrared safety photocells, 12/24V, surface mount, beam alignment adjustable up to 15°, up to 20m range
TAU 250K-SLIM 2 CH DIP-SWITCH TRANSMITTER

TAU 250K-SLIM 2 CH DIP-SWITCH TRANSMITTER

TAU S.r.l. Two-channel transmitter, dip-switch technology, 433,92 MHz
COMBI ARIALDO 383-G GATE STOP / bolt-down over guide rail

COMBI ARIALDO 383-G GATE STOP / bolt-down over guide rail

COMBI ARIALDO Sliding Gate Stop, (large) bolt-down over guide rail, zinc plated.
COMBI ARIALDO 450_Series NYLON GUIDE ROLLER

COMBI ARIALDO 450_Series NYLON GUIDE ROLLER

COMBI ARIALDO Sliding Gate Nylon Guide Roller with zinc plated bolt, available in 30 and 40mm diameter