Our Products
00909

SGD600/8BELT-24 24V HIGH SPEED SLIDING GATE DRIVE

SGD600/8BELT-24 24V HIGH SPEED SLIDING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

SGD600/8BELT-24 24V High Speed Sliding Gate Drive

24V 120W Industrial/Commercial Belt Drive System, Sliding Gate Drive, 230Vac 10A powered with stainless-steel cover, inbuilt Elsema MCV2 control unit in an ABS plastic enclosure with clear lid.
 
  • Ground track gates running near level to 8m and free rolling Cantilever gates to 600kgs
  • Fully adjustable ramp up, ramp down.
  • Opening/closing speed - variable up to 230mm/sec
  • Battery back-up - 2 x 12V 2.3 Ah batteries
  • Duty cycle - 100% when connected to 230Vac power source.
  • Cast-iron gearbox
  • Hot-dipped galvanised chassis
  • Internal limit switches – easy set cams.
  • Linear force - up to 100kgs
  • Belt with stainless steel core - sold separately

An installed system can include the following:

BS-400T Barrier-Curtain Sensor, 4 Infrared Through Beam Photocell, 10-30V dc relay output. For gate openings up to 7 m.
900OPTIC 2 x Sets of surface-mounted 12/24V ac/dc Infrared Safety Photocells, beam alignment adjustable up to 15º, 20 m range.
400CFZ22 Sliding Gate Galvanised Iron Rack, 22 x 22mm with brackets and screws. 2 metre lengths. (Module 4, Max. weight 3000 kg)
ULD913/ULD923 SensAble Sensors 12/24V, Single or Dual Channel vehicle inductive Loop Detector with base.
ULD911/ULD921 SensAble Sensors 230V, Single or Dual Channel vehicle inductive Loop Detector with base. Directional Control logic capable.


PLEASE NOTE: Safety First

The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Download PDF Acrobat Reader Logo-487
Data Sheet  
Manual Release   

You might also be interested in ...

COMBI ARIALDO 405_Series U WHEEL / with axle bolt

COMBI ARIALDO 405_Series U WHEEL / with axle bolt

COMBI ARIALDO 405_Series Sliding Gate U Wheel with axle bolt, 2 bearings.
TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU S.r.l. Set of infrared safety photocells, 12/24V, surface mount, beam alignment adjustable up to 15°, up to 20m range
TAU 250K-SLIM 2 CH DIP-SWITCH TRANSMITTER

TAU 250K-SLIM 2 CH DIP-SWITCH TRANSMITTER

TAU S.r.l. Two-channel transmitter, dip-switch technology, 433,92 MHz
PRESCO VR43 OUTDOOR ACCESS CONTROL KEYPAD

PRESCO VR43 OUTDOOR ACCESS CONTROL KEYPAD

Presco VR43 Vandal and weather resistant Backlit Keypad with Nidac & Wiegand Format.
PRESCO VR62 OUTDOOR ACCESS CONTROL KEYPAD

PRESCO VR62 OUTDOOR ACCESS CONTROL KEYPAD

Presco VR62 Vandal and weather resistant Backlit Keypad With Nidac & Wiegand Format.
COMBI ARIALDO 383-G GATE STOP / bolt-down over guide rail

COMBI ARIALDO 383-G GATE STOP / bolt-down over guide rail

COMBI ARIALDO Sliding Gate Stop, (large) bolt-down over guide rail, zinc plated.
COMBI ARIALDO 450_Series NYLON GUIDE ROLLER

COMBI ARIALDO 450_Series NYLON GUIDE ROLLER

COMBI ARIALDO Sliding Gate Nylon Guide Roller with zinc plated bolt, available in 30 and 40mm diameter
COMBI ARIALDO 902-20-MT3 GUIDE RAIL / screw down

COMBI ARIALDO 902-20-MT3 GUIDE RAIL / screw down

COMBI ARIALDO U Sliding Gate Guide Rail, surface mounted, drilled, screw down. 3 metre length
TAU 400CFZ22 STEEL GATE RACK / zinc plated

TAU 400CFZ22 STEEL GATE RACK / zinc plated

TAU Square Sliding Gate Rack 22x22 (Module 4, max 3000 kg) with screws and brackets