Our Products
01116

TAU 500MASTER-RAPID 24V SLIDING GATE DRIVE

TAU 500MASTER-RAPID 24V SLIDING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

TAU 500MASTER-RAPID 24V Sliding Gate Drive

TAU S.r.l. 24Vdc Gearmotor Sliding Gate Drive (230Vac powered) with optical encoder, built-in 500K126MA control board, with battery charger.

Suited to Ground Track gates running near level up to 1200 kgs and free rolling Cantilever gates up to 900 kgs.

 

  • Intensive use - 100% duty cycle when connected to 230Vac power source
  • Opening speed - 400 mm/sec
  • Closing speed – 233 or 400 mm/sec
  • Low voltage DC Gate Drive
  • Optical encoder technology (no limit switches required)
  • Control board protected within a plastic enclosure
  • Practical manual release with a personal key

Controlled by the K126MA Diamond series auto-adaptive algorithm Control Board with the following features
 

  • Built-in 3 channel 433.92 Mhz rolling-code radio receiver
  • Built-in battery charger for power outage back-up battery operation
  • Electronic obstacle detection and crush prevention. EN 12445/12453 standards
  • Soft start and soft stop
  • - 8 stage mechanical gate health via tri-colour diagnostic LEDs.
  • - 20 point flashing error tri-colour diagnostic LEDs for obstacle detection, motor over current, encoder health, low battery, plus more
  • Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology

Made in Italy Logo

Technical features 500MASTER-RAPID
Power supply (to control unit) 230 V AC (50 - 60 Hz)
Motor power supply 24 V DC
Motor Absorption 1.8 A (no load)
Absorbed power 360 W
Max. opening speed 400mm/sec
Max. closing speed 233 or 400mm/sec
Duty cycle 100 %
Max. thrust 1300 N
Operating temperature -20° C ÷ +55° C
Degree of protection IP 54
Max. gate leaf weight 1200 kg
Pinion module Module 4
Electronic Control Unit K126MA

EN12445 Compliant 50

PLEASE NOTE: Safety First

The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Downloads
MASTER-R Data Sheet 500MASTER-Rapid.pdf
MASTER Series Manual Release MASTER End-User Manual.pdf
MASTER Series Manual Release Video MASTER Series Manual Release Video