Our Products
650ARM250BENC

TAU 650ARM250BENC 12V LINEAR SWING GATE DRIVE

TAU 650ARM250BENC 12V LINEAR SWING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

TAU 650ARM250BENC 12V Linear Swing Gate Drive

TAU S.r.l. 12Vdc electromechanical Linear Swing Gate Drive with projecting stem, manual override, adjustable mounting bracket, and encoder. For open bar style gate leaf up to 4 metres.
 
  • Residential / apartment building / light commercial use 
  • Intensive use - 100% duty cycle when connected to 230Vac power source
  • Fast operating speed, approximate opening time 12.5 sec/90°
  • Optical encoder technology
  • Multi-position adjustable mounting bracket

Controlled by the D749MA Diamond series auto-adaptive algorithm Control Unit with the following features
 
  • Built-in 3 channel 433.92 Mhz rolling-code radio receiver
  • Built-in battery charger for power outage back-up battery operation
  • Electronic obstacle detection and crush prevention. EN 12445-12453 standards
  • Soft start and soft stop
  • Multi coloured diagnostic LEDs
  • Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology
 

Made in Italy Logo

Technical features 650ARM250BENC
Power supply (to control unit) 230 V AC (50 - 60 Hz)
Motor power supply 18 V DC
Absorption 1.3 A
Absorbed power 24 W
Opening time 90° 12.5 sec.
Duty cycle 100 %
Max. thrust 2600 N
Operating temperature -20° C ÷ +55° C
Degree of protection IP 44

EN12445 Compliant 50

PLEASE NOTE: Safety First

All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.

The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Downloads 
ARM Data Sheet 650ARM250 Series.pdf
ARM Series Gate Drive Video ARM Series Video of Construction
ARM200 Series Manual Release Instructions ARM200 End-User Manual.pdf
ARM Series Manual Release Video ARM Series Manual Release Video
Control Unit TAU 750D749MA.pdf

 

You might also be interested in ...

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU S.r.l. Set of infrared safety photocells, 12/24V, surface mount, beam alignment adjustable up to 15°, up to 20m range
SENSABLE SENSORS ULD913 SINGLE CHANNEL 12/24V VEHICLE DETECTOR

SENSABLE SENSORS ULD913 SINGLE CHANNEL 12/24V VEHICLE DETECTOR

SensAble Sensors 12/24V ac/dc Single Channel Inductive Loop Vehicle Detector for : Parking Barrier Control, Ramp Control Systems, Motorised Gates & Doors.
TAU 250K-SLIMRP 2 CH ROLLING-CODE TRANSMITTER

TAU 250K-SLIMRP 2 CH ROLLING-CODE TRANSMITTER

TAU S.r.l. Two-channel transmitter, rolling-code technology, 433,92 MHz
TAU 250T-4RP 4 CH ROLLING-CODE TRANSMITTER

TAU 250T-4RP 4 CH ROLLING-CODE TRANSMITTER

TAU S.r.l. Four-channel transmitter, rolling-code technology, 433,92 MHz, complete with support