TAU 650ARM270 230V LINEAR SWING GATE DRIVE

TAU 650ARM270 230V Linear Swing Gate Drive

TAU S.r.l. 230Vac electromechanical Linear Swing Gate Drive with projecting stem, manual override, and adjustable mounting bracket. For open bar style gate leaf up to 5 metres. Approximate opening time 21 sec/90°.
 

• Residential / light commercial use
• 230V Gate Drive
• Duty cycle – 36%
• Projecting stem Gate Drive
• Multi-position adjustable mounting bracket
• High torque and power
• Max. thrust – 2300 N
• Manual release with key lock

Controlled by the D750M Control Unit with the following features
 

• Built-in 2 channel 433.92 Mhz dip-switch/rolling-code radio receiver
• Slow-down and soft stop
• Complete with enclosure

 

Technical features	650ARM270
Power supply	230 V AC (50 - 60 Hz)
Motor power supply	230 V AC
Absorption	1.5 A
Absorbed power	280 W
Opening time	90° 21 sec.
Duty cycle	36 %
Max. thrust	2300 N
Operating temperature	-20° C ÷ +55°
Motor thermal protection	160° C
Degree of protection	IP 44

 

PLEASE NOTE: Safety First

All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.

The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 

> Downloads

ARM270 Data Sheet	650ARM270 Series.pdf
ARM Series Gate Drive Video	ARM Series Video of Construction
ARM200 Series Manual Release Instructions	ARM200 End-User Manual.pdf
ARM Series Manual Release Video	ARM Series Manual Release Video