TAU 650R18BENC 12V INGROUND SWING GATE DRIVE

TAU 650R18BENC 12V Inground Swing Gate Drive

TAU S.r.l. 12Vdc electromechanical Inground Gearmotor Swing Gate Drive with encoder. For open bar gate leaf up to 1.8m/200kg. The compact 650R18BENC Gate Drive is ideal where space is an issue.
 

• Residential use 
• Compact size
• Virtually invisible, does not affect the design of the gate
• Opening up to 360° with no additional accessories
• Optical encoder technology
• Fast operating speed, approximate opening time 13 sec/90°
• Intensive use - 100% duty cycle when connected to 230Vac power source
• Foundation Box with release system (ordered separately)
• Retrofit Arm for misaligned mountings (ordered separately)

Controlled by the D749MA Diamond series auto-adaptive algorithm Control Unit with the following features
 

• Built-in 3 channel 433.92 Mhz rolling-code radio receiver
• Built-in battery charger for power outage back-up battery operation
• Electronic obstacle detection and crush prevention. EN 12445-12453 standards
• Soft start and soft stop
• Multi coloured diagnostic LEDs
• Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology

 

Technical features	650R18BENC
Power supply (to control unit)	230 V AC (50 - 60 Hz)
Motor power supply	18 V DC
Absorption	0.7 A
Absorbed power	14 W
Opening time	90° 13 sec.
Duty cycle	100 %
Max. torque	192 Nm
Operating temperature	-20° C ÷ +55° C
Degree of protection	IP 67

 

PLEASE NOTE: Safety First

All gates should be installed with electric locking for security and to minimise excessive force placed on the Gate Drive(s) if the gate leaf(s) are more than approximately 2.5m wide.

The specifications and suggested gate sizes will vary depending upon other variables such as friction of hinges, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.
 

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW > to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 

> Downloads

Data Sheet	650R18BENC.pdf
Manual Release	R18BENC End-User Manual.pdf
Control Unit	TAU 750D749MA.pdf