Our Products
350T_ONE5B

TAU 350T-ONE5B 18V SLIDING GATE DRIVE

TAU 350T-ONE5B 18V SLIDING GATE DRIVE
larger imageMove mouse over the image to magnify
Enquire

TAU 350T-ONE5B 18V Sliding Gate Drive

TAU S.r.l. 18Vdc Gearmotor Sliding Gate Drive (230Vac powered) with optical encoder, built-in 500K125M control board, with battery charger.

Suited to Ground Track gates running near level up to 600 kgs

 

  • Intensive use - 100% duty cycle when connected to 230Vac power source
  • Opening speed - 233 mm/sec
  • Low voltage DC Gate Drive
  • Optical encoder technology (no limit switches required)
  • Control board protected within a plastic enclosure
  • Practical manual release with a personal key

Controlled by the K125M Control Board with the following features
 

  • Built-in 2 channel 433.92 Mhz rolling-code radio receiver
  • Built-in battery charger for power outage back-up battery operation
  • Electronic obstacle detection and crush prevention. EN 12445/12453 standards
  • Soft start and soft stop
  • Off Grid Solar Charge capable thanks to Photovoltaic (PV) Technology

Made in Italy Logo

Technical features 350T-ONE5B
Power supply (to control unit) 230 V AC (50 - 60 Hz)
Motor power supply 18 V DC
Motor Absorption 1.05 A
Absorbed power 250 W
Max. operating speed 233mm/sec
Duty cycle 100 %
Max. thrust 980 N
Operating temperature -20° C - +55° C
Degree of protection IP 54
Max. gate leaf weight 600 kg
Pinion module Module 4
Electronic Control Unit K125M

EN12445 Compliant 50

PLEASE NOTE: Safety First

The specifications and suggested gate sizes will vary depending upon other variables such as friction of wheels, environmental factors e.g. wind loading, type of cladding and external influences which may assist or degrade the recommended gate sizes.
 
All automation applications require external safety photocell protection / vehicle loop detector and appropriate warning signs and/or devices.

MAINTENANCE: To keep your Automated Gate running smoothly
READ MORE NOW >
to learn more on Safety and the Maintenance required to keep your Automated Gate running smoothly.

 
> Download PDF Acrobat Reader Logo-487
Data Sheet 350T-ONE5B.pdf  
Manual Release T-ONE End-User Manual.pdf  

You might also be interested in ...

COMBI ARIALDO 405_Series U WHEEL / with axle bolt

COMBI ARIALDO 405_Series U WHEEL / with axle bolt

COMBI ARIALDO 405_Series Sliding Gate U Wheel with axle bolt, 2 bearings.
TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU 900OPTIC INFRARED SAFETY PHOTOCELLS

TAU S.r.l. Set of infrared safety photocells, 12/24V, surface mount, beam alignment adjustable up to 15°, up to 20m range
TAU 250K-SLIM 2 CH DIP-SWITCH TRANSMITTER

TAU 250K-SLIM 2 CH DIP-SWITCH TRANSMITTER

TAU S.r.l. Two-channel transmitter, dip-switch technology, 433,92 MHz
PRESCO VR43 OUTDOOR ACCESS CONTROL KEYPAD

PRESCO VR43 OUTDOOR ACCESS CONTROL KEYPAD

Presco VR43 Vandal and weather resistant Backlit Keypad with Nidac & Wiegand Format.
PRESCO VR62 OUTDOOR ACCESS CONTROL KEYPAD

PRESCO VR62 OUTDOOR ACCESS CONTROL KEYPAD

Presco VR62 Vandal and weather resistant Backlit Keypad With Nidac & Wiegand Format.
COMBI ARIALDO 383-G GATE STOP / bolt-down over guide rail

COMBI ARIALDO 383-G GATE STOP / bolt-down over guide rail

COMBI ARIALDO Sliding Gate Stop, (large) bolt-down over guide rail, zinc plated.
COMBI ARIALDO 450_Series NYLON GUIDE ROLLER

COMBI ARIALDO 450_Series NYLON GUIDE ROLLER

COMBI ARIALDO Sliding Gate Nylon Guide Roller with zinc plated bolt, available in 30 and 40mm diameter
COMBI ARIALDO 902-20-MT3 GUIDE RAIL / screw down

COMBI ARIALDO 902-20-MT3 GUIDE RAIL / screw down

COMBI ARIALDO U Sliding Gate Guide Rail, surface mounted, drilled, screw down. 3 metre length
TAU 400CN NYLON GATE RACK / steel core

TAU 400CN NYLON GATE RACK / steel core

TAU Sliding Gate Nylon Rack, steel core, fibreglass reinforced, 22x22mm (Module 4, max 800 kg)